THE NATURAL STONELEAF SLATE
To equip your interior and exterior walls, floors, ceilings and furniture, the Stoneleaf slate is set on fiberglass in order to guaranty better density. Easy to cut and to set, it can be laid flat or on a round surface. Thin, light and flexible, the natural Stoneleaf slate makes the most of all the qualities of the stone without its drawbacks.
Check our whole range of 26 slate and mica shades in the name of world capital cities.
The natural Stoneleaf slate is very thin (between 1,2mm and 1,4mm) and light (between 1and 1,5kg/m2).
All our different StoneLeaf
The StoneLeaf slates are available in 31 different colors
The natural Stoneleaf slate comes in a variety of shades divided into two categories: the mica leaves and the slate leaves. In both cases the stone leaf is set on a fiberglass and polyester resin basis. Density and lightness are thus guarantied.
With Stoneleaf, let your desires and creativity express themselves. Our range is so varied that you will easily find the stone leaf that suits your project. Whether you wish to cover a wall or some furniture, our color chart provides all combinations.
Each natural stone leaf is unique. Thus its thickness can vary from 1,2mm to 1,5mm. Please note that the mica leaves will be thicker than the slate ones.
StoneLeaf Unpolished Marble
All the application area with StoneLeaf
Setting the natural Stoneleaf slate
The Stoneleaf slate is easy to set. Nevertheless you should not neglect the setting stipulations, which are different according to the rooms where the stone leaf is laid.
Set the product this way :
- Coat the stone leaf with the protection product.
- The base must be perfectly smooth, clean and dry.
- Use the SOUDAL FIX ALL glue: coat the stone leaf or paste the wall directly with 1 to 1,5mm thickness using a notched spatula on the whole surface. Be careful to stop 1cm from the sides so that the glue does not go over the edges once the stone leaf is set.
- Put aside and leave the stone leaf to dry for 24 hours.
The joint between the stone leaves can be realized as you wish. Sticking the leaves edge to edge will provide a better homogeneity. The making of the joint can be done with a standard cement joint. The various existing shades of joints help matching with the stone color.
MS Polymère, Néoprène, Epoxy, PU
Water repellent, Varnish, PU
Circular saw, Digital Cutting, Disqueuse